Reply
Contributor
Posts: 11
Registered: ‎03-14-2012

Re: AIM Sample code - close connection error

Expert
Posts: 4,525
Registered: ‎03-08-2010

Re: AIM Sample code - close connection error

If you are using IE. Check your SSL protocols settings.

•If this is an HTTPS (secure) address, click Tools, click Internet Options, click Advanced, and check to be sure the SSL and TLS protocols are enabled under the security section.

 

Could be your firewall block it. Check the logs and event viewer.

Contributor
Posts: 11
Registered: ‎03-14-2012

Re: AIM Sample code - close connection error

I checked the SSL and TLS the SSL 3.0 is enabled and the TLS 1.0 is enabled.  Is their an event log on Authorize.net I can check ?

Expert
Posts: 4,525
Registered: ‎03-08-2010

Re: AIM Sample code - close connection error

Do you have another PC on the same network to test the URL? It either your PC or the network.

Highlighted
Contributor
Posts: 11
Registered: ‎03-14-2012

Re: AIM Sample code - close connection error

It was the network.  Thanks for your help.

If you know of any sample c# code that takes values from a database table, sends them to authorize.net and then loads the response in a table,  that would be awesome.

Thanks Again.